tải mu 88

NC Torsion Bar Press Brake

The Torsion Bar Press Brakes are optimal for the forming of parts with a low operation cost and lower budget. Torsion Bar Press Brakes have Torsion bar synchronous NC 2 axis and 3 Axis control capability just like our larger Press Brakes.
Get Quote
Easy Bending Series-Torsion Bar Press Brake Represent economical and easy bending hydraulic press brake.
Easy Bending Series-Torsion Bar Press Brake Improved NC press brake is developed new generation high-end hydraulic press brake for our company, with advanced design,advanced configuration and fashion appearance, Press brake  advantage is high rigidity,high precision and high  efficiency .
Machine is installed cantilever NC system ESTUN E21,E300,Holland DA41S displaying mechanical stopper Y axis and back gauge X axis. Convenient operation, friendly HMI

Standard configuration:

  • Double cylinders control ram moving upward and downward.
  • Right-and-lift balance achieved by torsion synchronization.
  • NOK Japan layer seals for main cylinders.
  • Schneider key electrics.
  • Upper tools fast clamps.
  • Standard front supports arms.
  • Motor:Siemens
  • Oil pump:SUNNY.
  • Hydraulic system:Rexroth,Germany
  • Clip-and -sleeve pipe system.
  • The two fingers of back-gauge for 2500mm length machine( three fingers for 3200mm length machine; four fingers for 4000mm)
  • Electrical cabinet with ABB switch power outage.
  • With safety side door and back doors.


  1. 1
    Swivel pendant control unit operated by Estun NC-E21 control.
  2. 2
    Sliding front sheet support arms.
  3. 3
    Emergency stop buttons conveniently located on control panel and foot control.
  4. 4
    Mobile dual operation foot control.
  5. 5
    Segmented 86° offset top punch.
  6. 6
    Solid one piece four way multi vee (V) die block.
  7. 7
    Top punch tool intermediate holder system with wedge type adjustment.
  8. 8
    Powered hardened ballscrew back-gauge with 600-1000mm travel, operated by Estun NC-E21 control.
  9. 9
    Oil tank level indicator.
  10. 10
    Metal constructed safety guarding surrounding machine with clear side viewing panels.
  11. 11
    Integrated hydraulic system allowing rapid approach switching automatically to slow bend.

Holland DA-41s (Control Y,X Axis)

tải mu 88Liên kết đăng nhập
Press brake control for Y axis and backgaugeThe DA-41s control provides a complete solution for conventional press brake applications for 2 axes. Offering a versatile solution for axes control for the press beam and back gauge as well as a flexible I/O configuration, based on the state-of-the-art electronics.*Display       LCD display*Type    4,7" monochrome TFT*Technology High-quality foil cover with integrated membrane switches*Product memory      up to 100 programs*Number of program steps       25 program steps*Tools Tool library

ESTUN E300     (Control Y,X,R Axis+Crowning)

tải mu 88Liên kết đăng nhập
*4 axes are supported, viz, X-axis, Y-axis, R-axis and C-axis.*Automatic calculation of the block position, according to the bending angle, material, thickness and mold parameters*The back gauge can be controlled in a high-accuracy since the servo systems control X-axis and R-axis.*Optional hydraulic or mechanical to control the C-axis.*Program in absolute value or angle.*You can backup, restore, import and export the parameters, for commissioning the machine easily.

Back-gauge System

tải mu 88Liên kết đăng nhập
Easy Bending Series-Torsion Bar Press Brake with servo motor control back-gauge system, use linear guide and balls screw.
tải mu 88Liên kết đăng nhập
Advantage:X= 600-800mm strokeR=Manual adjust(200mm) Max Speed=350mm/s

Segment Die


The segment die is necessary for small workpiece fabrication.
tải mu 88Liên kết đăng nhập

Laser Protection and Manual Crowning

DSP, Italy Optional

Italy’s DSP Laser front protection system with CE norm will ensure the safety of worker’s fingers.
tải mu 88Liên kết đăng nhập
tải mu 88Liên kết đăng nhập
Let's Talk
188bet m88 trực tuyến nhacaiuytin link 12bet 2888k casino fb88